Dismantlement and Installation, Overhaul Slipring Motor

“TMEIC” 10 MW. 6600 V. 1020 A.
990 RPM. (Ex p)

Dismantlement and Installation, Overhaul Induction Motor

“TOYO DENKI” 1900 kW. 3300 V. 387 A. 742 RPM. (MG-SET)

Dismantlement and Installation, Overhaul Reactor

Reactor 1250 V. 400 A. (for DC Motor 3750 kW. 2 Units)

Dismantlement and Installation, Overhaul Synchronous Generator

“TOYO DENKI” 1730 kVA. 3300 V. 542 A. 750 RPM. (MG-SET)

Installation, Rewinding and Replace Commutator DC Motor

“ABB” 620/660 kW. 750/750 V. 870/873 A. 1060/1250 RPM.

Overhaul Slipring Motor

“ABB” 1700 kW. 6600 V. 186 A.
993 RPM. RPM. 2 Units

Dismantlement and Installation, Overhaul Slipring Motor

“ABB” 3500 kW. 6600 V. A. 994 RPM.

Dismantlement and Installation, Overhaul Slipring Motor

“ABB” 2250 kW. 6600 V. 237 A.
993 RPM.

Rewinding Stator & Rotor Slipring Motor

ASEA” 4350 kW. 6600 V. 493 A.
494 RPM.

Overhaul Slipring Motor

“LANZHOU” 3550 kW. 6000 V. 405 A. 744 RPM.

Dismantlement and Installation, Rewinding AC Motor

“HYOSUNG” 2600 kW. 6600 V. A.
262.1 A. 2970 RPM.

Overhaul AC Motor

“ABB” 710 kW. 400 V. 1215 A.
991/992 RPM.

Dismantlement – Installation, Overhaul Stator, Overhaul Pump and Test Pressure Submersible Pump

“WEIR” 660 kW. 660 V. 758 A.
740 RPM.

Rewinding Slipring Motor 1300 kW.

“SIEMENS” 6600 V. 136 A. 1489 RPM.

Overhaul Slipring Motor

“ELIN” 1300 kW. 6600 V. 135 A.
1484 RPM.

Dismantlement and Installation, Overhaul & Repair

Vertical Motor and Vertical Pump

Overhaul Raw Water Pump and Motor No.2-1P02B

AC Motor “ABB“570 kW. & Vertical “ALSTHOM”

Overhaul Service Water Pump (P-ES-3) and Motor

AC Motor “ABB“160 kW. & Vertical Pump 2 stage “WEIR”

Steam Turbine Generator Overhaul Inspections & Maintenance Auxiliary Hydrogen Cooled Generator

“HITACHI” 325000 kVA. 276250 kW. 18000 V. 10424 A. 3000 RPM.

Steam Turbine Generator Overhaul Inspections & Maintenance Generator Auxiliary Hydrogen Cooled Generator

“HITACHI” 325000 kVA. 276250 kW. 18000 V. 10424 A. 3000 RPM.

Generator Overhaul Inspections & Overhaul Seal Oil System of Steam Turbine Major Overhaul NPO-C20 Hydrogen Cooled Turbine Generator

“MITSUBISHI” 147970 kVA. 125774 kW. 13800 V. 6191 A. 3000 RPM.

Generator Overhaul Inspections & Overhaul Seal Oil System of Gas Turbine Major Overhaul NPO-C22 Hydrogen Cooled Turbine Generator

“MITSUBISHI” 166360 kVA. 13800 V. 6960 A. 3000 RPM.

Overhaul AC Motor

“ABB” 90 kW. 380, 400, 420 V. 165, 156, 150 A. 1776, 1449, 1781 RPM. 60 Hz.

Rewinding AC 2 Speed

“HITACHI” 90/45 kW. 380/380 V. 460/105 A. 1470/735 RPM.

Overhaul AC Motor

“SCHORCH” 560 kW. 400/690 V. 920/530 A. 2977 RPM.

Overhaul AC Motor

“SIEMENS” 200 kW. 380/660 V. 363/210 A. 1485 RPM.

Water Turbine Generator

“ABB” 13.25 MW. 11000 V. 192 A.
750 RPM. [Renovation Project Unit 5]

Inspection and Test for Generator

Generator Unit 1 – 3 : 3272.5 kVA. Generator [Francis]

Reinstallation Project for Generator Turbine

“GUANGDONG HONGYUANZHONGLI” 25882.3 kVA. 10999 V. 1358.5 A.
[Unit 1, 2, 3]

Generator Overhaul Service Hydropower Unit 2

“ABB” 83 MVA. 17.5 kV. 2738 A.
600 RPM.

Service Inspection of AVR and Excitation Panel and Service Generator

“DEC” 98 MW. 115.3 MVA. 10.5 kV. 6339.5 A. 3000 RPM.

Generator Inspection, Repairing, Test & Commissioning Generator

“GE ENERGY” 46212 kVA. 11000 V.
2426 A. 1500 RPM.

Overhaul AC Motor

“SIEMENS” 620 kW. 6600 V. 73 A.
594 RPM.

Maintenance Service of Steam Turbine Generator no.10 (ST.10) – Refurbishment Rotor Generator Steam Turbine

“SIEMENS” 70600 kVA. 10500 V.
3882 A. 3000 RPM.

Overhaul Slipring Motor

“ABB” 800 kW. 6600 V. 91 A.
988 RPM.

Overhaul Slipring Motor

“AEG” 3900 kW. 6000 V. 442 A.
993 RPM.

Overhaul Slipring Motor

“AEG” 4550 kW. 6000 V. 511 A.
993 RPM.

Overhaul Stator and Rewinding Rotor Overhaul AC Motor

“SIEMENS” 2240 kW. 6000 V. 255 A. 992 RPM.

Rewinding Slipring Motor

“ABB” 4200 kW. 6600 V. 435 A.
992 RPM.

Rewinding Synchronous Generator

“NISHISHIBA” 15000 kW. 3300 V. 3281 A. 1500 RPM.

Repair Bar Rotor and Dynamic Balance Rotor with Load Shaft

Overhaul Stator and Rewinding Rotor Generator

“IDEAL ELECTRIC” 4000 kW. 3300 V. 933 A. 1000 RPM.

Overhaul Generator

“AVK” 3750 kVA. 3300 V. 656 A. 1500 RPM.

Rewinding Generator

“TOYO DENKI” 18750 kVA. 3300 V. 3280 A. 1500 RPM.

Rewinding Synchronous Generator

“NISHISHIBA” 15000 k. 3300 V.
3280 A. 1500 RPM.

Rewinding DC Motor

“SIEMENS” 0.295..71/71 kW.
31-470/470 V. 164-168/168 A.
10-2410/2750 RPM.

Rewinding Motor Boiler Feed Pump No.1 AC Motor

“ABB” 850 kW. 6600 V. 85 A.
2979 RPM.

Rewinding Rotor Exciter of Generator

TG#12 192 kW. 160 V. 1200 A.
1500 RPM.

Overhaul DC Motor

“GE MOTORS” 400 HP. 500 V. 650 A. 250/500 RPM.

Replace Insulation of Slipring Turbine Generator Rotor

“TURBO Generator” 9.8 MW. 6.6 kV.
209 A. 3000 RPM.

Rewinding Slip Ring Motor

“MITSUBISHI” 600 kW. 3000 V.
140 A. 590 RPM.

Overhaul AC Motor

“TEMIC” 1500 kW. 2980/3040 V. 350/327 A. 750/1200 RPM.
37.9/60.7 Hz.

Rewinding DC Motor

“ABB” 620 kW. 711 720 720 V.
921 908 908 A. 1060 1075
1250 RPM.

Repair & Test Run No-Load AC Motor

“RELIANCE” 2000/1000 HP. 2300 V. 440-360 A. 987-493 RPM.

Refurbishment AC Generator

“STAMFORD” 700 kW. 380 V. 1329 A. 1500 RPM.

Rewinding DC Motor

“SUMITOMO” 75 kW. 220 V. 379 A. 1150/1750 RPM.

Overhaul DC Motor

“ABB” 2000 kW. 6600 V. 207 A.
995 RPM.

Rewinding Alternator (Synchronous Machine)

“EURO-DIESEL” 1000 kVA. 400 V. 1443 A. 1500 2600 RPM. [Alternator & Accumulator]

Dismantlement and Installation, Replace New Stator Motor (Onsite) Induction Motor 2 Units

2200 kW. & 3800 kW. Three phase adjustable speed induction motor “HITACHI”

New Stator Change and Cleaning Rotor

“HITACHI” Three Phase Adjustable Speed Motor 400 kW. 1450/1539 A. 210/700 RPM.

Overhaul AC Motor

“TMEIC” 907 kW. 950/1320 V. 680/545 A. 400/1200 RPM.

Rewinding DC Motor

“HANGZHOU NEW HENGLI “ 1250 kW. 1000 V. 1358 A. 430/1200 RPM.

Rewinding DC Motor

“SIEMENS” 5.75 – 444/444 kW. 30-420/420 V. 1130/1140 A. 10-770/770-1470 RPM.

Overhaul Motor Onsite AC Motor

“TOSHIBA” 530 kW. 6300 V.
61 A. 985 RPM. 2 Units

Overhaul AC Motor

Overhaul AC Motor “FUJI” 310 kW. 6600 V. 32 A. 1480 RPM.

Rewinding AC Motor

AC Motor 160 kW. 380 V. 289 A.
1480 RPM.

Rewinding AC Motor

“SIEMENS” 400 kW. 400/690 V. 690/400 A. 1488 RPM.

Rewinding Special Motor

STIRRER 157 kW. 725 RPM.

Overhaul Synchronous Motor

“BRUSH” Motor no. C-202 7400 kW. 6000 V. 735 A. 214.3 RPM.

Overhaul AC Motor

“TOSHIBA” 1280 kW. 6300 V. 450/1400 A. 2970 RPM.

Overhaul AC Motor

“TOSHIBA” 1300 kW. 6600 V. 153 A. 590 RPM.

Overhaul Stator and Replace Rotor Axial Lead Gas Turbine Generator

“GEA” 30000 kVA. 10500 V. 1650 A. 3000 RPM.

Overhaul AC Motor

“TECO-WESTINGHOUSE” 8500 kW. 6000 V. 910 A. 1489 RPM.

Overhaul Slipring Motor

“SIEMENS” 12500 kW. 6600 V.
1273 A. 994 RPM.

Rewinding AC Motor

“ABB” 935 kW. 11000 V. 58 A.
995 RPM.

Rewinding Synchronous Generator

“PEEBLES ELECTRICAL MACHINES”  13250 kW.  6900 V. 1386 A.  1500 RPM.

Rewinding Synchronous Generator

“KATO” 3250 kW. 4062.5 kVA.
6600 V. 355 A. 1500 RPM.

Inspection Off-Line High Voltage Motor AC Synchronous Motor

“SIEMENS” 31500kW. 11000 V. , AC Motor “WEG” 3350kW. 11000 V. and AC Motor “TECO” 3350kW. 11000 V.

Rewinding Generator

“CATERPILLA” 1056 kW. 600 V.
1800 RPM. 60 Hz.

Rewinding Synchronous Generator

“HMA” 25490 kW. 31863 kVA.
11000 V. 1672 A. 1500 RPM.

Rewinding Generator

“KATO” 800 kW. 277/480 V. 203 A. 1200 RPM. 60 Hz.

Rewinding Generator

“LEROY SOMER” 350 kW. 480/277 V. 526 A. 1800 RPM. 60 Hz.

Mixer Body Replacement and Overhaul Ram Cylinder

Mixer body and ram cylinder

Overhaul AC Motor

“MITSUBISHI” 90 kW. 380 V. 169 A.
1475 RPM.

Mixer 620 BB#7 Replacement

Overhaul AC Motor

“FAIRBANKS-MORSE” 100 HP. 400 V. 139 A. 915 RPM.

Overhaul AC MOTOR

“TMEIC” 4550 kW. 6600 V. 455 A.
2960 RPM.

Dismantlement and Installation, Overhaul Synchronous Motor

“TMEIC” 19000 kW. 11000 V. 1018 A. 1500 RPM.

Rewinding Slipring Motor

“ASEA” 4230 kW. 6000 V. 463 A.
494 RPM.

Repair, Rebuilding and Manufacturing Traction

Motor, Main Generator, Alternator

Rewinding AC Motor

“HYUNDAI” 3350 kW. 11000 V. 199.2 A. 2985 RPM.

Inspection New Motor, Dismantlement Old Motor, Installation New Motor & Alignment Synchronous Motor

“SIEMENS” 31500 kW. 11000 V. 1675 A. 1000 RPM.

Inspection & Overhaul AC Motor

“FLENDER” 810 kW. 3300V. 165 A. 2985 RPM.

Rewinding Stator, Restack and Repair Lamination Core Stator, Replace Shaft Rotor AC Motor

“LOTHER” 500 kW. 400/690-400/690 V. 185/107-222/129 A. 1492/1488 RPM.

Dismantlement, Installation and Overhaul Synchronous Motor

“VEM” 7100 kW. 11000 V. 388 A. 375 RPM. (Ex pz)

Dismantlement, Installation and Overhaul Motor (Single Bearing)

“GARBE-LAHMEYER” 800 kW. 6600 V. 95.7 A. 369 RPM. (Ex N)

Dismantlement, Installation and Overhaul Motor (Single Bearing)

“SCHORCH” 1450 kW. 6600 V. 166 A. 495 RPM. (Ex nA)

Inspection Rotor Compressor and Dynamic Balancing

LENGTH: 5,790 mm. , WEIGHT: 13,417.3 kg.

Rewinding Canned Pump

“TEIKOKU” 19 kW. 400 V. 42 A. 2 Pole (Ex d)

Dismantlement, Installation, Inspection AC Motor and Repair Motor

“SIEMENS” 5500 kW. 6600 V. 565 A. 1489 RPM. (Ex nA)

Inspection and Overhaul Stirrer Motor (Special Cleaning)

157 kW.

Dismantlement, Installation, Repair Rotor and Cleaning Stator Synchronous Motor

“TOSHIBA” 6000 kW. 3300 V. 1100 A. 200/400 RPM. 10/20 Hz.

Rewinding Stator and Renew Rotor Bar AC Motor

“TOSHIBA” 3000 kW. 1000/2000 V. 1289/1031 A. 225/1200 RPM. 7.6/40.4 Hz.

Replace Coupling Motor Onsite for AC Motor

“HITACHI” 2800 kW. 1250/1284 V. 1464/1424 A. 160/420 RPM. 5.44/14.26 Hz.

Onsite Mechanical Inspection and Cooling Synchronous Motor

“TOSHIBA” 6000 kW. 6 Units, “TOSHIBA” 8000 kW. 2 Units

Rewinding DC Motor

“SUMOTOMO” 200 kW. 440 V. 481 A. 1750 RPM.

Rewinding and Replace Commutator DC Motor

“ABB” 1250 kW. 730 V. 1800 A. 900/1200 RPM.

Dismantlement, Installation, Rewinding Stator & Rotor Slipring Motor

“SHANG DIAN” 1000/500 kW. 6000 V. 118/88 A. 986/494 RPM.

Making & Replacing brake lining

Rewinding VS Motor & Rewinding Techo Generator (Special Motor)

“YASKAWA” 37 kW., 200/400-380/415 V., 135/67.5-71.5/67.0 A., 1350-540/540-100 RPM.

Rewinding Stator & Overhaul, Dynamic Balance Main Rotor Generator

“VESTAS” 2000 kW. 690 V. A. STATOR CUR 1530 A. ROTOR CUR 610 A. 1680 RPM.

Rewinding AC Motor & Overhaul Cooling System

“ABB” 1830 kW. 6600 V. A. 187 A. 992 RPM.